Portfolio
Contact Us

Molto Precise Machining Co.,Ltd

Mobile:+86 18574307389

Email:tony@moltomachining.com

Add:Building A, No. 6 Furong Street, 3rd Industrial Area, Xiagang Community,ChangAn Town,Dongguan,China.

Home > Portfolio > Content

Tips for daily use of CNC lathe machining

Molto Precise Machining Co.,Ltd | Updated: Dec 26, 2018

Tips and precautions for daily use of CNC lathe machining


First: The CNC lathe is a lathe device controlled by a numerical control system, so the machine has high requirements for the use environment. It is best to use it in a constant temperature place, otherwise it is easy to affect the use of the machine due to temperature changes. At the same time, in order to ensure the normal use of the CNC lathe, it should also be used separately from the impact bed with high vibration force or the machine with electromagnetic radiation.


Second: The machine is a device that consumes a lot of power, so the requirements for the power supply are also very strict. It is to give the machine a lot of energy support, if there is a problem with the power supply, it will inevitably cause serious system downtime or other failures. When the data is running, all the data is stored inside the memory. When the power supply is cut off, all the data is maintained by the lithium battery with the power storage function. If the system downtime reaches a certain level and is not recovered, the most direct result is the loss of data information, so that the system will not function properly. Because the numerical control lathe works, the required voltage is 380 volts, and the current voltage in China is still in an unstable state. In order to protect the use of the machine, the data will not be lost due to the power supply. The system has automatic adjustment and compensation functions on the power supply configuration. For some separate types of lathes, the corresponding voltage regulator should be configured to ensure the problem of the machine.


Tips for daily use of CNC lathe machining





Third: CNC lathes cannot be sealed for a long time. If the storage time is too long, it will cause the data inside to be lost. This is why many 6150 CNC lathe manufacturers are now produced on demand. All customers, after placing the order, will the manufacturer produce in batches. For the factory floor, after the lathe is purchased back, it will be used as soon as possible in production. Otherwise, the system failure caused by the storage will not be worth the loss.


Fourth: Because CNC lathes are high-tech products, its operators and users must be professionally trained, and it is necessary to clearly understand the precautions and correct operation procedures. In addition, the use of the machine requires a unique programmer to program the machine production. The technical content contained in the later troubleshooting and repair is also very high. These need the most professional staff to complete. Otherwise, any omission of the link will have a major impact on the use of the machine. At the same time, in order to extend the life of the machine, the equipment should be maintained regularly.


Contact Us
Molto Precise Machining Co.,Ltd
Tel: Mobile: +8618574307389
Address: Building A, No. 6 Furong Street, 3rd Industrial Area, Xiagang Community,ChangAn Town,Dongguan,China.
Newsletter
Sign Up For Exclusive Updates
Get the latest special offers and discount information sent to your email address.
Copyright © Molto Precise Machining Co.,Ltd All rights reserved.