Precision CNC Machining Service
Contact Us

Molto Precise Machining Co.,Ltd

Mobile:+86 18574307389

Add:Building A, No. 6 Furong Street, 3rd Industrial Area, Xiagang Community,ChangAn Town,Dongguan,China.

Home > News > Content

The Rule Of Precise Cnc Machining Turning Accessories

Molto Precise Machining Co.,Ltd | Updated: Dec 01, 2018

The rule of precise cnc machining turning accessories

First, conscientiously implement the relevant provisions of the "General Operating Procedures for Metal Cutting Machines".
Second, earnestly implement the following general provisions on lathes:
1. When looking for a positive workpiece, only use the hand plate to move the chuck or open the minimum speed to find the right one.
2. When changing the direction of the spindle rotation, it is necessary to stop the spindle first, and it is not allowed to change the direction of rotation suddenly.
3. When loading and unloading the chuck, only the triangle belt can be rotated by hand to drive the spindle to rotate. It is absolutely forbidden to directly open the machine to force loosening or tightening. At the same time, it is necessary to put a piece of wood on the bed to prevent accidents.
4. The tool should not be extended too long, the gasket should be flat, and the width should be the same as the width of the bottom surface of the tool.
5. The work is not allowed to open the anti-vehicle method to brake the spindle rotation.
3. Seriously implement the following special regulations regarding some special lathes:
(1) Returning turret lathe:
1. It is not allowed to process bar material with curved surface and thick surface.
2. When loading, the material should be pointed at the chuck hole and gently hit in. Do not disturb the knock.
(B). program-controlled transfer lathe:
Pre-selection of the project's spindle speed, tool holder feed, tool holder trajectory and continuous offside according to the process requirements. Put the electric knob in the "alignment" position and test the vehicle. After confirming that there is no problem, place the electric rotation in the automatic or semi-automatic position.

Precise CNC Machining Turning Accessories

Contact Us
Molto Precise Machining Co.,Ltd
Tel: Mobile: +8618574307389
Address: Building A, No. 6 Furong Street, 3rd Industrial Area, Xiagang Community,ChangAn Town,Dongguan,China.
Sign Up For Exclusive Updates
Get the latest special offers and discount information sent to your email address.
Copyright © Molto Precise Machining Co.,Ltd All rights reserved.